Replacing Your Bissell CleanView Swivel 2256 HEPA Filter — What You Need to Know

⏱ ~10 minutes 🔧 No tools needed 🔄 Difficulty: Easy

Bissell recommends replacing the CleanView Swivel 2256 hepa filter Every 12 months. This guide walks you through the process step by step — no technician required.

📦 Need a replacement part first?

Compare all compatible HEPA Filter options for your Bissell CleanView Swivel 2256 before starting: View Bissell CleanView Swivel 2256 HEPA Filter options →

Step-by-Step Guide

1
Power off and unplug
Turn off your Bissell CleanView Swivel 2256 and unplug it from the wall. If cordless, remove the battery pack.
2
Locate the filter compartment
Find the hepa filter housing — on most CleanView Swivel 2256 units it's located near the top or rear of the cyclone assembly.
3
Remove the old filter
Twist or slide out the existing hepa filter. Avoid tapping it — this releases trapped particles into the air.
4
Inspect and clean housing
Wipe the filter housing with a dry cloth. Do not use water or cleaning products inside the vacuum.
5
Insert the new filter
Align the new hepa filter with the housing guides and press firmly until it clicks into place.
6
Test suction
Plug in (or reinsert battery) and run briefly to confirm normal suction is restored.

⚠ Common Mistakes to Avoid

  • Never clean filters with water unless the manual explicitly says they're washable
  • Don't force the part — if resistance, check alignment before applying pressure
  • Confirm the replacement part matches your exact model number before purchasing
  • Always disconnect power before any internal work
🔁 How often?

The Bissell CleanView Swivel 2256 hepa filter should be replaced Every 12 months under normal use. With pets or daily heavy use, consider replacing more frequently.