How to Replace Bissell MultiClean Allergen 2998 Brush Roll (Step-by-Step Guide)

⏱ ~10 minutes 🔧 No tools needed 🔄 Difficulty: Easy

Replacing the Bissell MultiClean Allergen 2998 brush roll is a straightforward DIY job that takes under 10 minutes and requires no special tools. Follow these steps and you'll restore full performance without paying a service fee.

📦 Need a replacement part first?

Compare all compatible Brush Roll options for your Bissell MultiClean Allergen 2998 before starting: View Bissell MultiClean Allergen 2998 Brush Roll options →

Step-by-Step Guide

1
Power off and flip over
Turn off your Bissell MultiClean Allergen 2998 and place it face-down on a soft surface to protect the finish.
2
Remove the brush roll cover
Use a coin or flathead screwdriver to release the cover clips. The cover should lift away cleanly.
3
Slide out the brush roll
The brush roll is held by end caps — pull gently toward you to disengage.
4
Cut away tangled hair/debris
Before installing the new roll, clear any debris from the housing channel.
5
Install the new brush roll
Align the new roll and press the end caps into their slots until they lock.
6
Replace cover and test
Reattach the cover, press until all clips engage, then test on carpet.

⚠ Common Mistakes to Avoid

  • Never clean filters with water unless the manual explicitly says they're washable
  • Don't force the part — if resistance, check alignment before applying pressure
  • Confirm the replacement part matches your exact model number before purchasing
  • Always disconnect power before any internal work
🔁 How often?

The Bissell MultiClean Allergen 2998 brush roll should be replaced Every 12-24 months under normal use. With pets or daily heavy use, consider replacing more frequently.